How to improve stamping efficiency of mobile phone power supply shrapnel in hardware stamping factory
The power spring produced by hardware stamping factory is mainly used in the connection of connector, battery and socket. It can provide a conductive communication path, generate pressure to maintain the contact surface of the shrapnel, and form a stable contact. In our daily life, the power supply shrapnel is widely used, and the demand is very large. How does the manufacturer produce it to meet the market demand?
The stamping power spring piece of metal stamping plant adopts high-speed continuous punching. First, the metal sheet is sent into the die to punch the equidistant side hole; the metal sheet is roughened to a position forward; the metal sheet is cut up and down edge and cut to a forward position; the metal sheet is roughly formed and punched at a forward position; the metal sheet is punched one position forward Position extrusion punching; metal sheet forming and stamping forward one position; metal sheet metal finishing one position forward; metal sheet metal finishing one position forward; metal sheet metal half shearing punching forward one position; sheet metal blanking one position forward.
The above is the stamping method used by stamping plant to improve the production efficiency of shrapnel. The above stamping method can improve the production efficiency when stamping the mobile phone power supply shrapnel.