Is metal stamping dangerous
Those who have been exposed to metal stamping know that stamping is operated on the machine, and stamping processing has certain risks. However, as long as the standard operation and the stamping processing system are followed, the safety factor will be higher. Let’s share with you
Those who have been exposed to metal stamping know that stamping is operated on the machine, and stamping processing has certain risks. However, as long as the standard operation and the stamping processing system are followed, the safety factor will be higher. Small to share with you the following points: precision metal stamping factory production corner
1. In the process of metal stamping, for the sake of safety, we should pay attention to the adjusting screw of the slider, and do not let it extend too long. In the processing of metal stamping parts, in order to prevent the mold from moving, a layer of paper can be padded when the reinforcement is carried out. It is very dangerous for the mold to rotate. In order to ensure the safety in the process of metal stamping parts, it is necessary to dismantle the mold until the machine stops running completely. Shield
2. When processing metal stamping parts, if it is necessary to adjust and install the mold, the power supply should be turned off first. Although it can be done without power off, the risk index will be greatly increased. Therefore, in order to ensure safety, the operation must be carried out after the power is completely turned off and the machine is completely stopped.
3. In the processing of metal stamping parts, the existence of fastening screws can guarantee the processing safety of metal stamping parts to a certain extent. In order to ensure that this protection does not become a hidden danger, we must always tighten the fastening screws to ensure that the fastening screws can play a security function.