Skip to content

The difference between a spring close and a normal page

    Ordinary page: for cabinet doors, windows, doors, etc. The materials are iron, copper and stainless steel. The disadvantage of ordinary hinge is that it does not have the function of spring hinge, after installing the hinge must be installed with a variety of touch beads, otherwise the wind will blow the door panel.

    Pipe Close: Also known as spring hinges. Mainly used for furniture door panel connection, it generally requires a thickness of 16,20 mm. The material has galvanized iron and zinc alloy. Spring hinges are attached to adjustment screws that can adjust the height and thickness of the plate up and down, left and right. One of its characteristics is that according to the space, with the cabinet door opening angle. In addition to the general 90 degrees angle, 127 degrees, 144 degrees, 165 degrees, etc. have the corresponding hinge matching, so that the various cabinet doors have the corresponding stretch.

    Gate page: It is divided into ordinary type and bearing type, ordinary type has been mentioned before. Bearing type from the material can be divided into copper, stainless steel. From the current consumption situation, the choice of copper bearing shim, because its style beautiful, bright, affordable, and equipped with screws.

    Other pages: glass page, countertop page, turn the door page. The glass sheet is used to install frameless glass door doors and requires glass thickness not greater than 5,6 mm.